Entries - Furniture

Balancing act speaks to the process we all go through of holding it all together. I wanted to represent how fragile and yet connected we can be during this process of growth and healing.   Macrocarpa. 175cm - 252cm - 42cm

Bar leaner made from Elm wood and Macrocarpa, The Elm being bar top and legs, Mac being the footrest. tenon and mortise joint used, Finished with two coats linseed oil. L) 1.65m W) 550mm H) 1040mm 

100% reclaimed pallet wood. Sanded, polished and water baked in the sun for a pine summer natural stain.  Dimensions 640mm W 540mm D 400mm H

Coffee Table made from black walnut, no fixings used with this crafted piece, all interlocking using tenon and mortise joints. Finished with linseed oil.  L) 1m W) 400mm H) 450mm.

100% reclaimed pallet wood(pine). Natural edges with a simplicity on the look and the build. Coloured with natural wood-aging dye and linseed oil to finish the surface. 1700mm L 240mm W 800mm H

The drawers house was made with a plywood and rimu. Using recycled rimu such as weather boards, 4 by 2. With push to open draw runner meaning that no handle need. Sizes are 100.3cm high 97.5cm long  55.5cm deep.

Crafted from a striking tōtara slab with carved Jarrah legs scribed to fit against the natural live edge underbelly of the piece and locked into place with blind wedged joints. Finish: Tung oil, beeswax. Length: 1160mm, Width: 640mm, Height: 400mm.

Solid and laminated Maple and Walnut, Yellow Cedar, and Birdseye maple veneer, some wedged joints. Osmo oil and coloured waxes. Music desk is height adjustable and tilts, accomplished with discreet wedges. Strong, light and open form.  Music Stand 640x560x1,500mm

Solid English oak dining table featuring intersecting kwila inlays that form a dynamic geometric composition across the top. Rounded edges soften the structure. Finished with multiple coats of water-based lacquer. 78 cm high × 150 cm long × 100 cm wide.

Traditional Japanese style, tapered legs and floating top.  Made of Pin Oak.  Size 400x280x230.  Finish: Satin Polyurethane.

A combination of modern Japanese minimalism and the lines found in historic Japanese architecture.  100% Solid American Cherry with hand-shaped black Ash & Brass accents.  Rubio Pure, Pre-colour Intense Black & black hardwax oil finish.  1843mmH x 1178mmW x 570mmD

This table is constructed from reclaimed native timber. Rimu and Matai. Clear lacquer finish. Table is 1435mm long x 355mm deep x 855mm high.

Mantarraya occasional table inspired by movement of a manta ray. Made from Saligna and Maple, its sculptural curves create a sense of balance and motion. The table measures 620mm wide, 650mm height with a glass top revealing the joinery beneath.

Ngaru explores curvature through a flowing, sculptural form inspired by movement in nature. For an entranceway or hallway, a surface for keys and objects while adding character and movement to the space. Rimu, Oak. 1200L × 170H × 170D mm.

Original design, Japanese inspired stool in black walnut with carved seat and turned legs. Finished in Danish oil, beeswax to base. 53 x 28 x 46 cm

Sculptural coffee table made from salvaged roadside timber, combining a buttressed trunk base with an end-grain top. Rimu butterfly keys stabilise natural splits. Finished with multiple coats of water-based lacquer. 58 cm high × 84 cm diameter.

Interlocking shelf using the cross-lap joint slightly modified to prevent racking made from reclaimed totara posts, keeping some of the rough edge intact to give it character. Finished with linseed oil L) 1.8m W) 145mm H) 800mm.

Spirals and strip lighting. Made with kwila, rimu and oak. The light and the colours are controlled by Alexa voice commands.  Finish is with a friction polish. Height 1300mm, foot 300mm wide.